Hydraulic stations PAUL

Гидравлические станции, hydraulic stations

PAUL mobile hydraulic stations are used to operate such hydraulic equipment as:

  • Tensioning jacks
  • Stress relieving cylinders
  • Cutting tools
  • Etc., used in the production of prestressed concrete elements.

Place an order for PAUL hydraulic stations

Contact us

Station Models

NG15
hydraulic stations PAUL portable mini pump units mainly used for hydraulic equipment used in the production of pre-stressed concrete elements.

NG50
hydraulic stations This generation of hydraulic units complements the well-reputed “mini pump units” and “hydraulic automatic pump monitoring and measuring units”. Due to its compact design, the NG50 series is easily operating and more efficient than mini-pump units. Depending on the type of control, they are suitable for all PAUL tensioning jacks, hydraulic cylinders, steel knives, etc.

NG100
hydraulic stations It is the most efficient and powerful station for working with four-hose jacks. It is possible to connect up to 3 jacks to the station.

FOR TENSION RELIEVING CYLINDERS
Hydraulic pump unit for removing tension of the molded concrete units using single-acting hydraulic motors.

How does the station work?

PAUL hydraulic stations are mainly used to operate hydraulic equipment used in the production of prestressed concrete elements. Pump units are usually equipped with a three-phase motor, but can also have an AC engine, pneumatic motor and gasoline motor.

The control is usually carried out by means of a reliable manual hydraulic valve. Additional electrical controls are also available for any desired assembly functions.

Complete hydraulic station includes a base unit, power unit, pressure gage, hydraulic couplings and interconnecting cable.

Station work

Tensioning hydraulic stations

Hydraulic stations are devices that are needed to provide power supply for such mechanisms as tensioning jacks, stress relieving cylinders, cutting tools, etc. They are widely used in production facilities that manufacture reinforced concrete products, especially if the prestressed reinforced concrete technology is used.

The capacity and quality of the hydraulic station determine the speed, accuracy and performance. Therefore, it is important to buy equipment that will meet the needs of a particular plant as well as quality standards.

Paul tensioning hydraulic stations show excellent performance results. You can buy them from our TDM Company, as well as order other equipment necessary for the production of concrete slabs, piles and other products

How do the hydraulic stations work?

This equipment is necessary mainly for the operation of hydraulic-type mechanisms. These Paul pump units are equipped with a three-phase engine, but there are models that have AC motor, pneumatic motor and gasoline motor. The control is generally carried out using manual hydraulic valve, which is characterized by low resource consumption. Other controls (automated or electrical) are also possible depending on the assembly.

When used with tensioning jacks, the pump unit is equipped with an adjustable relief valve with a fly-wheel for setting the pressure load. There are also adjustable valves which provide retraction and wedge seating functions. Another valve is a drain valve, which makes it easier to relieve stress pressure.

The electric motors are equipped with switches to protect the motor during overheating or overloading.

Radial-piston pump is mounted on the flange of the motor. The reverse flow filter ensures oil purification.

The design of the hydraulic station includes:

  • base unit;
  • power unit;
  • pressure gage;
  • hydraulic couplings;
  • interconnecting cable.
Tensioning hydraulic station: Paul SERIES

Paul offers a wide range of hydraulic stations with different technical characteristics in the series:

  1. NG 15 is small portable unit that is suitable for operating the equipment at the pre-stressed concrete products plant. Models of this series make it possible to generate pressure from 63 to 160 bar.
  2. NG 50 device is also compact, and it is easily operating and more efficient than NG15. Depending on the type of control, it is possible to select devices for operation with any jacks, hydraulic cylinders, steel knives, etc. Models of this series make it possible to generate pressure from 450 to 700 bar.
  3. NG 100 are the most efficient and powerful stations that are suitable for operation with four-hose jacks. It is possible to connect up to 3 jacks to one station. This device has a three-phase motor, 3.0 kW, 5.5 kW or 7.5 kW. Operating pressure: 420 bar.
  4. Device for tension relieving cylinders is designed to relieve tension. It uses single-acting hydraulic motor.

At TDM-Engineering Oy you can buy tensioning hydraulic stations of various capacities and designs. Paul's models are notable for their reliability and high performance. Prestressed reinforced concrete technology.

Place an order for PAUL hydraulic stations

Contact us
Написать в вайбер
Написать в Телеграм
Позвонить Россия
Позвонить Финляндия